Related Pages

Here is a list of all related documentation pages:

[detail level 12]

Build Scope
▼Configure Scope
Example config for a one-area DAQmx system using one NI-6259 card	This is the most simple and cheapest configuration
Example config for a one-area DAQmx system using two NI-6259 cards	The drawback in the previous configuration is that one card generates the output signal for both x and y scanners
Example config for a one-area FPGA/DAQmx system using one NI-6259 card and a NI-7962R FPGA with NI FlexRIO 6587 adapter module (photon counting).	In this configuration the concept is to output scanner/fast z/Pockels signals from a regular 6259 card
Example config for a one-area resonance scanner FPGA/DAQmx system using one NI-6259 card and a NI-7962R FPGA with NI FlexRIO 5751 adapter module (high-speed digitizer)	For theory of operation and details on the hardware and software implementation have a look at the documentation/resonance folder
Example config for a two-area nbeam FPGA/DAQmx system using two NI-6259 cards and a NI-7962R FPGA with NI FlexRIO 6587 adapter module (digital demultiplexing).	In this configuration the concept is to have one scanner but two areas
Example config for a one area FPGA/DAQmx system using one NI-6259 card and a NI-7962R FPGA with NI FlexRio 5771 adapter module.	In this configuration the adapter module does 1.5GHz sampling and integration of the PMT signals
Example config for a two-area nbeam FPGA/DAQmx system using two NI-6259 cards and a NI-7962R FPGA with NI FlexRIO 5771 adapter module (analog/digital demultiplexing).	In this configuration the concept is to have one scanner but two areas
Running Scope
Developing Scope	Remember: Always document your code
Scope concepts	Scope's features are realized by